Maintenance Guide

How to Change Lawn Mower Oil (and What Type to Use)

By Wildwood Repair Team Reviewed by a certified technician Updated June 23, 2026 9 min read
Quick Answer
To change lawn mower oil, run the engine briefly to warm the oil, disconnect the spark plug wire, drain the old oil, then refill with fresh oil to the full mark. Most walk behind mowers use about 0.5 quart of SAE 30 or 10W-30, and riding mowers use 1.5 to 2 quarts. Change it after the first 5 hours on a new engine, then once a season or every 50 hours.

Clean oil is the cheapest insurance there is for a small engine, yet it is the step most owners skip. Knowing how to change lawn mower oil takes about fifteen minutes, costs a few dollars, and adds years to the engine. Below we cover which oil to use and how much, the simple steps to drain and refill it, and how often the job should be done.

What Type of Oil Does a Lawn Mower Need?

Most small four stroke mower engines run on detergent oil rated SAE 30 for warm weather or 10W-30 for a wider temperature range. Synthetic 5W-30 or 10W-30 is an excellent choice and flows better in cold starts. Always check your owner manual, since the engine maker lists the exact grade.

Oil gradeBest for
SAE 30Warm season mowing, most walk behind mowers
10W-30Varying temperatures, riding mowers
Synthetic 5W-30 or 10W-30Cold starts and longer service life
Important: A four stroke mower takes straight engine oil. Never mix oil into the gas. Only two stroke engines use an oil and fuel mix, and putting that mix in a four stroke engine causes heavy smoke and damage.

How Much Oil Does a Lawn Mower Hold?

Capacity depends on the engine, but as a guide, most walk behind mowers hold about 0.5 quart, and most riding mowers hold 1.5 to 2 quarts. Always fill to the full mark on the dipstick rather than to a fixed amount, since overfilling causes smoke and leaks.

Tools and Supplies

  • Fresh oil of the correct grade
  • A drain pan or container
  • A socket or wrench if your mower has a drain plug
  • An oil extractor or turkey baster if it drains through the fill tube
  • Rags and a funnel

How to Change the Oil Step by Step

1. Warm the engine

Run the mower for a couple of minutes. Warm oil drains faster and carries away more debris.

2. Disconnect the plug wire

Pull the spark plug wire so the engine cannot start while you work.

3. Drain the old oil

Empty the fuel tank or keep it low, then either remove the drain plug into a pan, or tip the mower carefully with the filter side up to pour out through the fill tube. An extractor pulls it cleanly through the dipstick tube with no tipping.

4. Refill to the full mark

Add fresh oil slowly through the fill tube, checking the dipstick as you go. Stop at the full mark. Do not overfill.

5. Reconnect and test

Wipe up spills, reconnect the spark plug wire, start the mower, and check for leaks.

Pro tip: Recycle the old oil. Most auto parts stores take used motor oil free of charge.

How Often Should You Change Lawn Mower Oil?

On a brand new engine, change the oil after the first 5 hours of use to clear out break in debris. After that, change it once a season or every 50 hours of running, whichever comes first. Mowers that work hard, run in dusty conditions, or cut large areas benefit from more frequent changes.

Why Fresh Oil Matters So Much

Oil lubricates, cools, and cleans the engine. As it ages it thins, fills with grit, and stops protecting the moving parts, which leads to overheating and wear. A few dollars of oil once a season prevents repairs that can cost more than the mower. It is the best value maintenance you can do, and it pairs naturally with a yearly tune-up.

Rather Have a Real Technician Handle It?

A Wildwood technician comes to your driveway, diagnoses the problem, and fixes it on the spot, usually in about an hour. More than 10,000 repairs completed since 2019, with flat rates quoted before we arrive so there are no surprises.

Frequently Asked Questions

What kind of oil does a lawn mower take?
Most four stroke mowers use SAE 30 for warm weather or 10W-30 for a wider temperature range, and synthetic 5W-30 or 10W-30 works very well. Check your owner manual for the exact grade your engine maker recommends.
How much oil does a lawn mower need?
Most walk behind mowers hold about 0.5 quart, and most riding mowers hold 1.5 to 2 quarts. Always fill to the full mark on the dipstick rather than a fixed amount, because overfilling causes smoke and leaks.
How often should I change my lawn mower oil?
Change it after the first 5 hours on a new engine, then once a season or every 50 hours of use, whichever comes first. Change it more often if you mow large areas or work in dusty conditions.
Do you mix oil with gas in a lawn mower?
Only in two stroke engines, which are rare on mowers. Most mowers are four stroke and take straight engine oil in the crankcase. Mixing oil into the gas of a four stroke engine causes heavy smoke and damage.
Can I use car oil in my lawn mower?
A quality detergent car oil in the correct grade, such as 10W-30, is acceptable for many mower engines. Still, check your manual, since some engines call for a specific small engine oil for best protection.
W
About the Author

Wildwood Repair Team

The Wildwood Small Engine Repair team has completed more than 10,000 mobile repairs on lawn mowers, snow blowers, generators and outdoor power equipment since 2019. Every guide is written from real bench experience and reviewed by a certified small engine technician before publishing.